The Roblox documentation defines 1 stud as 28 cm, which is 0.28 m. It is also about 11.02 inches or 0.919 feet.
Convert studs to meters, centimeters, feet and inches, and work out WalkSpeed, jump height and jump reach.
1 stud equals 0.28 m (0.92 ft, 11.02 in). 100 studs are 28 m, or 91.86 ft.
| Studs | Meters | Centimeters | Feet | Inches |
|---|---|---|---|---|
| 1 | 0.28 | 28 | 0.92 | 11.02 |
| 2 | 0.56 | 56 | 1.84 | 22.05 |
| 4 | 1.12 | 112 | 3.67 | 44.09 |
| 5 | 1.4 | 140 | 4.59 | 55.12 |
| 10 | 2.8 | 280 | 9.19 | 110.24 |
| 16 | 4.48 | 448 | 14.7 | 176.38 |
| 20 | 5.6 | 560 | 18.37 | 220.47 |
| 50 | 14 | 1,400 | 45.93 | 551.18 |
| 100 | 28 | 2,800 | 91.86 | 1,102.36 |
| 200 | 56 | 5,600 | 183.73 | 2,204.72 |
| 500 | 140 | 14,000 | 459.32 | 5,511.81 |
| 1,000 | 280 | 28,000 | 918.64 | 11,023.62 |
| 5,000 | 1,400 | 140,000 | 4,593.18 | 55,118.11 |
Basis: 1 stud = 28 cm, per the official Roblox documentation (verified on 2026-10-06). Foot and inch follow the international definition.
1 meter is 3.57 studs and 100 feet is 108.86 studs.
| Real-world length | Studs |
|---|---|
| 1 meter | 3.57 |
| 2 meters | 7.14 |
| 5 meters | 17.86 |
| 10 meters | 35.71 |
| 100 meters | 357.14 |
| 1 kilometer | 3,571.43 |
| 1 foot | 1.09 |
| 6 feet | 6.53 |
| 10 feet | 10.89 |
| 100 feet | 108.86 |
| 1 mile (5,280 feet) | 5,747.66 |
Studs rounded to up to 2 decimal places.
The default WalkSpeed (16 studs per second) equals 4.48 m/s, or 16.13 km/h.
| WalkSpeed (studs/s) | m/s | km/h | mph |
|---|---|---|---|
| 8 | 2.24 | 8.06 | 5.01 |
| 12 | 3.36 | 12.1 | 7.52 |
| 16 (default) | 4.48 | 16.13 | 10.02 |
| 20 | 5.6 | 20.16 | 12.53 |
| 24 | 6.72 | 24.19 | 15.03 |
| 32 | 8.96 | 32.26 | 20.04 |
| 50 | 14 | 50.4 | 31.32 |
| 100 | 28 | 100.8 | 62.63 |
WalkSpeed is measured in studs per second. Real speed is computed with 1 stud = 0.28 m, ignoring acceleration, slopes and collisions.
The stud is Roblox's unit of length. The official Roblox documentation sets 1 stud equal to 28 cm, so 1 meter is about 3.57 studs. This tool converts in both directions between studs, meters, centimeters, feet and inches and shows every result at once. The Movement mode turns the character defaults into real units. Humanoid.WalkSpeed is measured in studs per second and defaults to 16, which is 4.48 m/s or about 16.1 km/h. The jump comes from JumpPower (default 50) or JumpHeight (default 7.2 studs), depending on UseJumpPower, and gravity defaults to 196.2 studs per second squared. Height and reach are calculated for flat ground with the physics formula for a vertical launch. Treat them as a planning estimate for gaps and platforms, then confirm the final numbers in Studio.
Paste the code into your HTML and the tool shows up on your page, without J-Kit's navigation and ads. It still runs in the browser of whoever visits your site.
<iframe
src="https://jkit.tools/embed/en-US/roblox-studs-converter"
width="100%"
height="600"
style="border:0"
loading="lazy"
referrerpolicy="no-referrer-when-downgrade"
title="Roblox Studs Converter"
></iframe>
<p style="font-size:12px;margin:6px 0 0">Tool by <a href="https://jkit.tools/en/tools/roblox-studs-converter">J-Kit</a></p>Using it in a paper, class or post? Copy the link or a ready-made reference. The access date is today's.
<a href="https://jkit.tools/en/tools/roblox-studs-converter">Roblox Studs Converter</a>
These references help contextualize formulas, standards, APIs and limitations used on this page. They do not replace professional validation when a result has legal, financial, medical or operational impact.
The Roblox documentation defines 1 stud as 28 cm, which is 0.28 m. It is also about 11.02 inches or 0.919 feet.